Gumshoe · Method reference

Standards compliance review

Check a design against required standards, platform guidelines, and internal policies.

Conceptual illustration of standards compliance review.
Effort
Medium
Participants
Not required
Remote friendly
Yes
Evidence / output
Expert review

What it is

A review that verifies a design conforms to applicable standards, such as platform human-interface guidelines, brand standards, regulatory rules, or an internal design system.

When to use it

Late Prototype into Implement, before release in regulated or standards-bound contexts.

Why (value)

Catches compliance gaps that create legal, platform-rejection, or brand risk before they ship.

How to run it

  1. Assemble the applicable standards and checklists.
  2. Review the design against each requirement.
  3. Mark pass, fail, or not applicable with evidence.
  4. Log failures with severity and owner.
  5. Verify fixes against the standard.

Inputs and outputs

  • Inputs: The design and the governing standards or guidelines.
  • Outputs: A compliance checklist with findings and actions.

Time and effort

Medium. Depends on the number and depth of standards.

Evidence and limitations

Produces expert-review conformance evidence; meeting a standard is not the same as being usable or desirable, which require direct-user evidence. See Evidence and limitations.

Tips and pitfalls

  • Use authoritative, current versions of standards.
  • Record evidence for each judgment.
  • Separate hard requirements from recommendations.

Variations

Platform guideline review, regulatory compliance, brand compliance, and design-system conformance.

Need help choosing and applying a method?

Gumshoe helps teams connect research, collaborative workshops and service design to the decisions they need to make.

Discuss your project with Gumshoe Explore Gumshoe services

Sources and further reading

Explore related methods

  • Accessibility evaluation — Assess whether a product can be used by people with disabilities, against standards and with assistive tech.
  • Consistency inspection — Check an interface for internal consistency in patterns, terminology, and behavior.
  • Design system work — Build and maintain the shared components, tokens, and guidelines a product is made from.

A general practice reference. This page does not establish that a method was used on a particular client project or that an outcome was measured.